In modern industrial production, the inspection of industrial conveyor lines is an effective means to timely grasp the technical status of equipment, implement equipment condition monitoring and maintenance, and is the basic work of maintenance. It is a guarantee to detect and eliminate equipment hidden dangers in time to prevent sudden failures and accidents. An important part of the normal operation of the equipment. Proper use and maintenance of the assembly line is an important part of equipment management. It is a series of maintenance work performed by the operators and professionals on the basis of the technical data and parameter requirements and maintenance rules of the equipment. It is also an objective requirement for the operation of the equipment itself.

       Workers in the workshop should not be in a hurry. The reminder is that they only need to stop the motor immediately. When the equipment is produced, the stop button will be set on the side or bottom. This can ensure the safety performance of the machine and stop the motor with dynamic brake. Another way to stop the emergency stop is to let him run freely to know the stop position. This is the case with the fixed brake. This is the way of frictional resistance. It is natural.

       Introduce some common fault lamp names and contents: a. The encoder is abnormally cleared in time, and the upper limit of the number of revolutions is set. This is the absolute rotation of the absolute value encoding area or the setting is incorrect. Reset; b, position too large offset, if the offset value in the production exceeds the range set by the user, the indicator light will be on immediately; c, the power line is suddenly disconnected, and the private service unit is connected or not. Password, this time will not be powered, this is resettable content; d, the encoder parameters are abnormal; e, the item is overloaded, the wild species will also have an error reminder.

 ;      Routine maintenance and inspection of the motor: Whether it is new or old, it should be taken care of. In fact, it is only a simple check. This is a rough standard. It is accompanied by instructions for use when it is shipped. To how to maintain, there is a corresponding knowledge for reference. However, please do not create disassembly servo motor and other operations, if it is too serious, please do not make it yourself, you can contact us, will arrange maintenance personnel on-site service, to solve your problems. You only need to check every day whether the sound is normal or not, and the oil seal needs to be replaced for a while. Then the resistor needs to be replaced or tested every six months to one year. There is basically no big problem in the comprehensive inspection. Use with confidence.