The assembly line is made up of a 28mm diameter lean tube with a wide variety of connectors, and a workbench assembled with other applications such as table tops, sockets, etc., depending on the operation. The Weitao line bar workbench can be independent, combinable and easy to adjust, and can be freely designed and assembled according to the operation needs. It is suitable for inspection, maintenance and product assembly in various industries; it makes the factory more tidy, the production arrangement is easier, and the logistics is smoother. It can adapt to the continuous improvement of modern production, conforms to the principle of human-machine, enables the on-site staff to operate standard, comfortable, and realize the concept and creativity of the environment quickly. At the same time, it has the characteristics of lightness and firmness, and the surface is clean and wearable.

The industrial conveyor line manufacturer's workbench meets the production needs of the workshop and is more suitable for the addition and application of various accessories. It has the following advantages: standard materials (lean pipes, joints and accessories) design and assembly of special station equipment and production systems. The assembly is simple, the application is flexible, and it is not limited by the shape of the component, the space of the workstation, and the size of the site; the transformation is simple, and the structural function can be expanded at any time as needed. Give greater play to the creativity of on-site employees and continuously improve lean production management on site. Materials can be reused, saving production costs and supporting environmental protection. The surface of the lean tube is a plastic layer that does not easily damage the surface of the component. Improve production efficiency, improve the overall quality of employees, and stimulate potential.

       There should be no casting defects such as sand holes, pores, cracks, slag inclusions and shrinkage on the working surface. All kinds of casting surfaces should be cleaned of sand, and the surface is flat and the paint is firm. Each edge should be blunt. For flat work surfaces with a precision class lower than “00”, sand holes with a diameter of less than 15 mm are allowed to be blocked with the same material and their hardness should be lower than the hardness of the surrounding material. There should be no more than four places on the working surface, and the distance between them should be no less than 80mm.

Threaded holes or cylindrical holes for lifting devices such as handles and lifting rings should be provided on the opposite sides. When designing the hoisting position, consideration should be given to minimizing changes due to hoisting.

According to the user's request, after the threaded holes or grooves are provided on the working surface of the plate, these parts should not have a convex phenomenon higher than the working surface.